Progressive International Electronics RLM - Manual (Page 13)

RLM Progressive International Electronics
Page 4 Version 1.1 / November 98
rlminstl.mnl
System Installation
System Installation Requirements
In preparation for the RLM installation, ensure that the following
requirements have been met.
1. Following the manufacturer’s installation instructions, install the
dispensing equipment (dispensers and data distribution boxes).
2. Test all dispensers in stand-alone (manual) mode.
3. Test all dispensers with same brand console to check basic
dispenser functionality and confirm a working communications
link between the DBox and the dispensers. On dispensers which
have programmable identification numbers, ensure that the
numbers are set correctly. If multiple dispensers contain the same
i.d. number, communication conflicts will occur.
All dispensers and communications should be functioning properly before
proceeding with RLM installation. If not, refer questions to the dispenser
vendor/manufacturer.