Progressive International Electronics RLM - Manual (Page 48)

Progressive International Electronics RLM
Version 1.1 / November 98 Page 39
rlminstl.mnl
Diagnostics
Troubleshooting Electronic Versions
RLM/E Diagnostics
PROBLEM RECOMMENDATION
RLM does not talk to tank Run Tester or WinTester utility.
monitor.
RLM does not talk to Tester Check jumper settings on RLM. Refer to
or WinTester. See "Testing Diagram: RLM (Electronic) Connector/
the RLM" section. Jumper Layout
Baud correct?
Parity correct?
Stop bits correct?
Data bits correct?
Device address correct?
Check power indicator on RLM main
board.
Check PC.
Comm port on PC OK?
RS232 cable plugged into PC?
Port parameters set correctly on Tester/
WinTester?