Watlow CLS - Manual (Page 148)

140
Appendix B: Enhanced Process Control
By adjusting the Maximum and Minimum inputs, you can scale the
output appropriately:
PV Retransmit Menus
The Setup menus for the PV Retransmit feature appear under the Setup
Loop PV Retransmit menu.
In order to view the PV retransmit menus, you need to select "Yes" at
the following prompt.
If you select "No" to the above screen, the controller skips down to the
retransmit for cool. Cool is set up the same way that the heat is set up.
PV Assignment
Selectable Values: Any loop or None (in this case, loop No. 02).
0%
100%
Max.
Output
Min.
Output
Min.
Input Min.
Input
Output(OV%)
Input(PV)
Linear Scaling of PV for Retransmit
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUT%
SETUP LOOP 02
PV RETRANSMIT?
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUT%
02 HEAT OUTPUT
RETRANS PV? 03