Watlow CLS - Manual (Page 88)

80 CLS User’s Guide
Setup
Heat or Cool Output Filter
Use this menu to dampen the heat or cool output's response. The output
responds to a step change by going to approximately 2/3 of its final
value within the number of scans you set here.
Selectable range: 0-255. Setting the output filter to 0 turns it off.
Heat and Cool Spread
Use this menu to set the spread between the heat and cool output and the
spread of the On/Off control action.
Selectable ranges: 0 - 255, 25.5, 2.55, .255 or .0255, depending on the
way you set up the Input menus.
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUT%
04 HEAT CONTROL
FILTER ? 2 SCANS
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUT%
01 SPREAD ?
5
º F