Overview – Watlow CLS User Manual
Page 9
Overview
CLS User’s Guide 1
Overview
This manual describes how to install, setup, and operate a 4CLS, an
8CLS, or a 16CLS. Included are seven chapters, two Appendices, and a
glossary of terms. Each chapter covers a different aspect of your control
system and may apply to different users. The following describes the
chapters and their purpose.
•
Introduction: Gives a general description of the CLS and its related
specifications.
•
Installation: Describes how to install the CLS and its peripheral
devices.
•
Using the CLS: Provides an overview of operator displays used for
system monitoring.
•
Setup: Describes all the setup displays for the controller, and how to
access them.
•
Tuning and Control: Explains PID control and provides tips for
tuning your system.
•
Troubleshooting: Gives some basic guidelines for solving control
problems.
•
Linear Scaling Examples: Provides an example configuring a pres-
sure sensor, and one configuring a flow sensor.
•
Appendix A: Ramp and Soak. This section explains how to setup
and use Ramp/Soak profiles in your application.
•
Appendix B: Enhanced Process Control. This appendix describes
optional process variable retransmit and cascade control features.