A1-3 – Yokogawa EJX115A User Manual
Page 74
<Appendix 1. List of DTM Menu>
A1-3
IM 01C25T04-01EN
• Calibration
• Target Mode
• Pressure Calibration
• Static Pressure Calibration
• Clear Calibration
• Calibration Information
• Pressure Raw Value Unit
• Sensor Lower limit
• Sensor Upper limit
• Calibration Span Min
• Calibration
• Pressure Trimmed Value
• Static Pressure Unit
• Static Pressure Value LRL
• Static Pressure Value URL
• SP Calibration Span Min
• Calibration
• Static Pressure Trimmed
Value
• Lower Calibration Point
• Upper Calibration Point
• Lower Calibration Deviation
• Upper Calibration Deviation
• Clear Calibration (Method)
• Pressure - Calibrated
Value
• Static Pressure - Calibrated
Value
• Pressure Trimmed Value
• SP Lower Calibration Point
• SP Upper Calibration Point
• SP Lower Calibration
Deviation
• SP Upper Calibration
Deviation
• Static Pressure High Side
Value
• Lower Calibration Point
• Upper Calibration Point
• Lower Calibration Deviation
• Upper Calibration Deviation
• SP Lower Calibration Point
• SP Upper Calibration Point
• SP Lower Calibration
Deviation
• SP Upper Calibration
Deviation
• Sensor Calibration Method
• Sensor Calibration
Location
• Sensor Calibration
Executor
FA0106.ai
• Physical Block
• Static Revision No
• Target Mode
• Actual Mode
• Identification
• Diagnosis
• Configuration
• TAG
• Descriptor
• Message
• Manufacturer
• Product Designation
• Device Serial Num
• Software Revision
• Hardware Revision
• Profile Revision
• PROFIBUS Ident Number
• ID No.
• Installation Date
• Software Description
• Diagnosis
• Device Status
• Diagnosis
• Diagnosis Extension
• Device Status
• HW Write Protection
• Write Locking
• Local Operation
• Factory Reset
FA0107.ai