Yokogawa RAKD - Manual (Page 18)

<3. INSTALLATION>
3-4
IM 01R01B30-00E-E 5th edition January 01, 2013 -00 All Rights Reserved. Copyright © 2003, Rota Yokogawa
3.2.2 Conductor connection with Quickon
To connect the conductor, please observe in particular the following steps :
1
2
3
5
15 mm
4
F6.EPS
F7.EPS
- Strip the sheath to a length of approx. 15 mm
(fig. 3-4) and slide the union nut (1), the cap (2)
and the rubber seal (3) onto the conductor.
Fig. 3-4
Fig. 3-5
- Slide the rubber seal as far as the rim of the insulation and then slide the cap onto the rubber seal.
This provides the strain relief for the conductor (fig. 3-5).