Yokogawa RAKD - Manual (Page 8)

<1. INTRODUCTION>
1-2
IM 01R01B30-00E-E 5th edition January 01, 2013 -00 All Rights Reserved. Copyright © 2003, Rota Yokogawa
• When carrying Rotameter RAKD around,
exercise extreme care to avoid dropping it
accidentally and causing bodily injury.
Warranty
• The warranty of this instrument shall cover the
period noted on the quotation presented to the
Purchaser at the time of purchase. The Seller
shall repair the instrument free of charge when
the failure occurred during the warranty period.
• All inquiries on instrument failure should be
directed to the Seller’s sales representative from
whom you purchased the instrument or your
nearest sales office of the Seller.
• Should the instrument fail, contact the Seller
specifying the model and instrument number of
the product in question. Be specific in describing
details on the failure and the process in which
the failure occurred. It will be helpful if
schematic diagrams and/or records of data are
attached to the failed instrument.
• Whether or not the failed instrument should be
repaired free of charge shall be left solely to the
discretion of the Seller as a result of an
inspection by the Seller.
The Purchaser shall not be entitled to
receive repair services from the Seller free
of charge, even during the warranty period,
if the malfunction or damage is due to:
• improper and/or inadequate maintenance of the
instrument in question by the Purchaser.
• handling, use or storage of the instrument in
question beyond the design and/or specifications
requirements.
• use of the instrument in question in a location
not conforming to the conditions specified in the
Seller’s General Specification or Instruction
Manual.
• retrofitting and/or repair by an other party than
the Seller or a party to whom the Seller has
entrusted repair services.
• improper relocation of the instrument in question
after delivery.
• reason of force measure such as fires,
earthquakes, storms/ floods, thunder/lightning, or
other reasons not attributable to the instrument
in question.
CAUTION
• When removing the instrument from hazardous
processes, avoid contact with the fluid and the
interior of the meter.
• In case of Explosion proof type instrument,
further requirements and differences are
described in Chapter 8 " INSTRUCTIONS FOR
EXPLOSION PROTECTED RAKD”. The
description in Chapter 8 is prior to other
descriptions in this instruction manual..
Restriction on Use of Radio Transceiver
Although the transmitter has been designed to
resist high frequency electrical noise, if a radio
transceiver is used near the transmitter or it
external wiring, the transmitter may be affected by
high frequency noise pickup. To test for such
effects, bring the transceiver in use slowly from a
distance of several meters from the transmitter,
and observe the measurement loop for noise
effects. Thereafter, always use the transceiver
outside the area affected by noise.
WARNING
IMPORTANT