Yokogawa Multi Channel Oxygen Analyzer System ZR22/AV550G - Manual (Page 31)

<3. Parameters>
3-18
IM 11M12D01-51E
3.6.2 Channel Card Self-Diagnostics
Call up “ Detailed setup” display.
1. Device setup ---> 4. Detailed setup
1
2
3
4
5
6
YZ/
3
F030701-1.ai
VWX
2
JKL
4
AV550G:
Detailed setup
1 Control
2 Channels
3 Channel status
4 Output condition
5 Device information
HOME SEND
AV550G:
Channels
1 Ch1 detailed setup
2 Ch2 detailed setup
3 Ch3 detailed setup
4 Ch4 detailed setup
5 Ch5 detailed setup
HOME SAVE
AV550G:
Error
Cell voltage OFF
Heater temp ON
Ch card OFF
Card comm OFF
EXIT
AV550G:
Ch1 detailed setup
1 Ch1 status
2 Sensors
3 Error
4 Alarm
HOME SEND
AV550G:
Alarm
Oxygen ON
Zero conc ratio OFF
Span conc ratio OFF
Cal time over OFF
CJ temp OFF
4 Alarm EXIT HELP
STU
1
Select “ ”
Select “ ” (this
example shows how to display
Self-Diagnostics for Channel 1).
Select “ ”
If OFF is displayed (at right)
then there are no errors.
In this example, a “ ”
alarm has occurred.
Revert to Error/Alarm screen.
Select “ ”
If OFF is displayed (at right)
then there are no alarms.
In the display at left, an
Oxygen concentration alarm
has occurred.
Display Operation
AV550G:
Ch1 detailed setup
1 Ch1 status
2 Sensors
3 Error
4 Alarm
HOME SEND
Heater temp
Channels
Ch1 detailed setup
Error
Alarm