Yokogawa GC1000 Mark II Process Gas Chromatograph - Manual (Page 15)

<4. Engineering>
4-2
IM 11B06E01-01E
l Setting the system card
Set the system compact flash card for FCJ to PC by USB adaptor.
Run the following batch file.
[Uncompressed folder]/INSTALL_ASGW/install_ASGW.bat
This batch file sets the IEC application, Java application and system setting file on the system
card.
System setting file includes initial IP address setting.
The initial IP address can be changed later.
After writing, the system card set on the CPU card of ASGW, and turn on the ASGW.
Initial IP address = 192.168.1.151
NOTE
Do not format the system compact flash card. The card becomes invalid and new one is required.
l Initializing with resource configurator
The method of initial setting operation with resource configurator is described on the instruction
manual of FCJ.
The work flow is described in this chapter. However, refer to the instruction manual for details of
each operation.
(1) Setting the IP address
Refer to 4.3.1 Modification of IP address.
(2) Downloading the license file
Download the license file that is loaded from the STARDOM web site to ASGW with the
resource configurator.
Refer to on-line help of resource configurator.
4th Edition : Nov. 22, 2011-00