Yokogawa DO30G Dissolved Oxygen Sensor - Manual (Page 10)

<1. General>
1-3
IM 12J5B3-01E
1.2.2 Model and Suffix Codes
• DO Sensor
Model
DO30G DO sensor
– Always -NN -NN
Membrane
thickness
50 Mm -50
Cable terminal
Cable length
3m
5m
10m
15m
20m
-03
-05
-10
-15
-20
Option
Code
Suffix Code Description
Pin terminal *1
Fork terminal
M4 ring terminal *2
*1 Select pin terminal for DO402G, DO202, and FLXA21.
When terminal box is used, select WTB10-DO3.
*2 Used to connection to FLXA21.
When terminal box is used, select WTB10-DO4.
-PN
-FK
-FL
• DOX8A Parts Set for Maintenance
Model
DOX8A
Parts set for
maintenance
(for membrane
thickness of 50 µm)
Sensor
For membrane
replacing type sensor
-M
– Style B *B
Option
Code
Suffix Code Description
A set of zero-adjusting reagent and maintenance parts
<Contents>
Zero adjusting reagent (sodium sulfite 500 g) ... 1 bottle
Membrane assembly
(for membrane thickness of 50 μm) .................3 sets
Electrolyte for sensor (50 ml) ............................. 1 bottle
Syringe for replacing electrolyte .................................. 1
Polish for silver electrode (30 g) ........................ 1 bottle
Polyethylene beaker (200 ml) ...................................... 1
• DOX8W Calibration Set (optional)
Model
DOX8W Calibration set
Option
Code
Suffix Code Description
*A
This is necessary if the span calibration is to be done using a saturated dissolved oxygen solu-
tion. It is not necessary for air calibration.
<Contents>
Air pump, stirrer, stirring element, bubbler, clamp, beaker, and thermometer.
Note: The calibration set can be used in common regardless of the type of holder.
4th Edition : Apr 05,2011
1
2
3
4