11 technical specifications, 1 ls18 subwoofer, 1 system specifications – Nexo LS18 User Manual

Page 73: 11 t

Advertising
background image

T

ECHNICAL

S

PECIFICATIONS

Page 73/103

11 T

ECHNICAL

S

PECIFICATIONS

11.1 LS18 Subwoofer

11.1.1 System specifications


SYSTEM SPECIFICATIONS

LS18 with NXAMP TD Controller

Frequency Response [a]

35 Hz - 120 Hz ±3dB

Usable Range @-6dB [a]

32Hz - 130 Hz

Sensitivity 1W @ 1m [b]

107 dB SPL Nominal

Nominal Peak SPL @ 1m [b]

137 to 140 dB Peak

Nominal Impedance

8

Crossover Frequencies

60 Hz

– 85 Hz - 120 Hz Active

Amplified Controller

NXAMP4x1: 2 x LS18 in parallel on 2 bridged channels
NXAMP4x4: 2 x LS18 on 1 channel

SYSTEM OPERATION

Electronic Controller

The NEXO NXAMP presets are precisely matched to the LS series cabinets and include sophisticated
protection algorithms. Using LS Series cabinets without a properly connected NXAMP will result in poor
quality and can damage components

Speaker Cables

LS18 is wired 1- & 1+ on 2 In/Out Speakon connectors
Single cables can thus be used to loop through to PS15-R2 or to Geo S12.

PRODUCT FEATURES

LS18 (LS18e)

Components:

1 x 18’’ (46cm) 4’’ voice coil long excursion 8

driver

Height x Width x Depth

510 x 675 x 775 mm (20.1” x 26.1” x 30.5”)

Weight : Net

55.5 kg excluding accessories (122.3 lb)

Connectors

2 x NL4MP Speakon 4 pole

Construction

Baltic Birch Ply & structured black coating

Fittings:

Handles

4 metal recessed pockets (None)

Front finish

Molded Dark Grey Metal Grill

Flying Points

Two side plates connecting with external accessories (None)

Stand fittings

Internal Steel Stand Fitting on Top (35mm, 1"3/8) allows pole mounting for PS15 or Geo S12 (None)

As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.
[a] Response curves & data : Half-Space Anechoïc radiation for the LS18 + NXAMP.
[b] Sensitivity & Peak SPL data : these will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise., Wideband to the
specified ±3dB range. Data are for speaker + processor + recommended amplifier combinations. Peak SPL is at clipping of recommended amplifier.
[c] Directivity curves & data : obtained by computer treatment on off axis response curves.













Advertising
This manual is related to the following products: