Hired-Hand RS-300 Door - Manual (Page 18)

Part No. 4801-5157 Rev 11-05 RS-300 Door Page 18 of 30
8.3 Mounting The Manaras Operator
Locate the four mounting holes. The optimum distance between the door shaft and operator drive shaft is
between 12" and 15". Mount the OPERA unit by fastening it to the wall, bench or hood with 3/8" or 1/2"
thru-bolts or if the wall is of such construction so as to prohibit use of thru-bolts, lag bolts and shields of
sufficient size may be used. Do not tighten. Refer to Figure 15, Mounting Dimensions For Wall Or
Hood.
Figure 15 Mounting Dimensions For Wall Or Hood