Hired-Hand RS-300 Door - Manual (Page 22)

Part No. 4801-5157 Rev 11-05 RS-300 Door Page 22 of 30
5. Release and engage the retaining bracket. Make sure that the bracket engages in the slots of both limit cams
after each adjustment.
6. Manually lower the door to a nearly closed position and repeat steps 3 through 5 with the Close Position cam.
7. Upon completion of all wiring connections (Section 8.5), repeat steps 2 through 6 of Section 8.4 using the
"Stop" button for adjustments of limit switches to their final, exact positions.
Figure 21 Adjusting The Limit Cams
Pull the travelling cam retaining bracket
on desired side to adjust cam position.