LumaSense Technologies IGA 740 - Manual (Page 11)

Safety
KLEIBER 740 7
3.2 General Safety Notes
The KLEIBER 740 pyrometer has been built in accordance with the currently valid standards
of the technology and the recognized safety regulations and ensures the highest safety
level.
The fundamental safety and occupational safety requirements of applicable laws, standards,
and guidelines have been taken into account in the pyrometer design. The safety of the
pyrometer is confirmed by the declaration of conformity and the CE mark.
All information related to safety is with reference to the regulations of the European Union
currently in force. In other countries, applicable laws, national directives and safety
regulations have to be met.
Apart from the safety instructions given in these operating instructions, you should also take
into account the generally valid regulations for accident prevention and environmental
protection as well as the regulations of the respective professional associations and strictly
comply with them.
Note the general safety instructions:
Commissioning of the pyrometer may only be carried out by persons qualified to do
so, taking the safety instructions into account.
Pay attention to the installation site requirements and notes for commissioning (see
section 6).
Only use the original cables provided as accessories for the connection of the
pyrometer. Other cables, especially cables manufactured by yourself, are not
permitted.
Lay all cables and cooling water pipes in such a way that they are not exposed to any
tension and are not clamped or squashed.
Before start-up, carry out a visual inspection for damage to the components of the
pyrometer (housing, optics, cable and pipes). Never operate the pyrometer with
damaged components.