LumaSense Technologies IGA 740 - Manual (Page 25)

Maintenance and Care
KLEIBER 740 21
9.1 General
The pyrometer is largely maintenance-free. Its function depends, how
the condition of the optics. The optics must therefore be checked and if necessary cleaned
a
to vironmen
se cessary i f the measured tem
the expected range
In the case of excessive contamination or scratches of the optics, please contact the
technical customer service (contact address - see page 22).
Check the cables and the protective housing
se
9.2 Cleaning the Optics
Clean the lens with a soft cloth or cotton pad and with white spirits. The optics is thus
cleaned and the pyrometer is again ready for use.
9 Maintenance and Care
information
ever, considerably on
t regular intervals according
ction 9.2). This is ne
the operating and en
n particular i tal conditions (see
perature levels do not lie in
at regular intervals for damage and a firm
ating.
CAUTION
Humidity can lead to the destruction of the electrical and electronic components!
ter or cleaning the immediate environment of Do not use any liquids for cleaning the pyrome
the pyrometer!
IMPORTANT
The servicing period depends particularly on the operating and environmental conditions and
is therefore to be specified by the operator!