LumaSense Technologies IGA 740 - Manual (Page 27)

Taking out of service, Disposal
KLEIBER 740 23
e, Disposal
11.1 Taking out of service
Take the pyrometer out of operation as follows:
ply to the pyrometer.
cables at the rear side of the pyrometer.
3. If applicable switch off the cooling water supply.
ove the connections of the cooling system and empty the remaining
water from the cooling ducts of the pyrometer.
5. Dismantle the pyrometer from the mounting plate.
6. If necessary bring the optics in and tighten the annular nut.
The pyrom
11.2 D
For disposal, you can return the pyrometer to LumaSense Sensor GmbH (for address see
age 21). For this you should pack the pyrometer appropriately in the original packaging or
11 Taking out of servic
1. Switch off the power sup
2. Remove the
4. If applicable rem
cooling
eter is thus out of operation.
isposal
p
use a cardboard carton with shock absorbing PE material.
D
Removing electrically live cables risks injury and damage to equipment.
Never remove electrically live connecting cables. Before removing a cable, ensure that the
power supply has been switched off.
ANGER
REFERENCE TO ENVIRONMENTAL PROTECTION
Do not dispose of the pyrometer with domestic refuse!