LumaSense Technologies IGA 740 - Manual (Page 6)

Basic Information
2 KLEIBER 740
1.3 Intended Use
The KLEIBER 740 pyrometer is to be used exclusively for the non-contact measurement of
surface temperatures of the materials specified in section 1.2. Any applications beyond that
area are not allowed! Any damage resulting from this is the sole responsibility of the
operator.
Proper use of the plant also includes:
the observance of the requirements of these operating instructions for transport and
storage, assembly, operation and care of the pyrometer
the observance of the power requirements specified in section 2 and the operating
and environmental conditions
the compliance with the legal accident prevention and environmental regulations
Among applications/conditions for which the pyrometer is not intended for use are in
particular:
the use of the pyrometer within medical areas
the use of the pyrometer in the food industry
the use of the pyrometer in areas where there is danger of explosion
the use of the pyrometer outside of the operating and environmental conditions
specified in section 2
1.4 Warranty and Liability
The LumaSense Sensor GmbH offers a warranty of 2 years for the pyrometer starting from
the date of billing. The warranty covers manufacturing defects as well as defects which are
determined during operation and which can be imputed to defects of LumaSense Sensor
GmbH. In these cases, the pyrometer will be repaired free of charge. The freight charges
are the responsibility of the respective sender.
LumaSense Sensor GmbH reserves the right to exchange the equipment or parts of the
instrument instead of a repair. After a repair, LumaSense Sensor GmbH offers a warranty of
12 months on all repaired and/or exchanged instrument components.
Deviations from the proper use described in this user manual will result in restricted
warranty and liability or the loss in case of damage. Damage to wearing parts
(e.g. fuses) is excluded from the guarantee.
Warranty and liability claims for personal injuries and/or material damage are excluded if
this or these result from one or more of the following causes:
Improper use of the pyrometer
inappropriate operation and servicing of the pyrometer
unauthorized modifications to the pyrometer without prior consultation with LumaSense
Sensor GmbH
rough, mechanical actions or deliberate destruction of the pyrometer