LumaSense Technologies IGA 740 - Manual (Page 5)

Basic Information
KLEIBER 740 1
1 Basic Information
1.1 Notes for the User Manual
This user manual describes the structure of the KLEIBER 740 infrared pyrometer for non-
contact temperature measurement and gives the operators all the necessary information
related to installation, operation, de-installation along with information related to
maintenance and repairs of the pyrometer. When malfunctions occur, the user manual
provides suggestions for their potential causes and their repair.
This user manual is intended for qualified service and maintenance personnel with
appropriate technical expertise including a basic knowledge of temperature measuring
technology.
Before you use the pyrometer for temperature measurement, you must have read and
understood these operating instructions! Keep the manual so that it is available at all times.
Take into account all the requirements given in this user manual. This is a pre-condition for
the correct and professional use of the pyrometer,
proper maintenance, cleaning and care of the pyrometer
prevention of risks and strict observance of the essential technical safety regulations.
Document structure and Symbols
Operating instructions to be performed in sequence are numbered in chronological order.
They are grouped together in operational units and accompanied by the corresponding
results.
Listings without a sequential order are presented as bullet points and items in sub-lists are
preceded by dashes.
Safety precautions are shown with pictograms and key words. They provide information
about the type, source and consequences of the hazard, and safety precautions. The
meanings of the pictograms and key words are explained in the "Safety Instructions"
chapter.
1.2 Purpose
The KLEIBER 740 pyrometer is particularly intended for the non-contact measurement of
surface temperatures on metal, ceramic, plastics and is specially designed for industrial
applications as well as applications in the area of research and development.
The 740 also enables you to solve high speed applications in laser areas by using laser
rejection filters and challenging temperature measurement on silicon or tungsten.