1 explosion proof housing, 3 limit of liability and warranty, 4 unpacking and inspection – LumaSense Technologies M8100SM-EXP User Manual

Page 8

Advertising
background image

E

2

T QUASAR Flare Monitors Operation Manual

General 8

1.2.1 Explosion Proof Housing

The housing is designed to meet the explosion-proof requirements of the National Fire
Protection Association (NFPA) Article 500 for hazardous locations. This Instrument holds both

CSA International and European (ATEX) certifications.
To ensure safe operating conditions, it is recommended that you review the certification and

area classifications that pertain to this system:

Reference

Appendix B, Area Classification/Protection Concepts

Appendix C, Declaration of Conformity/Certificate

Warning: Service personnel shall be qualified to install and service electrical
equipment designed for areas classified as hazardous. At no time should the cover be

removed unless power is switched off first. When it is necessary to service the
instrument with the power applied, ensure proper safe environmental conditions exist

and that such maintenance is authorized and pursuant to safe conditions. See
Chapter 10, Safety Assurances and Precautions, for more information.

1.3 Limit of Liability and Warranty

All general information and notes for handling, maintenance and cleaning of this instrument
are offered according to the best of our knowledge and experience.
LumaSense Technologies is not liable for any damages that arise from the use of any examples
or processes mentioned in this manual or in case the content of this document should be

incomplete or incorrect. LumaSense Technologies reserves the right to revise this document and
to make changes from time to time in the content hereof without obligation to notify any

person or persons of such revisions or changes.
All instruments from LumaSense Technologies have a regionally effective warranty period. This
warranty covers manufacturing defects and faults which arise during operation, only if they are

the result of defects caused by LumaSense Technologies.
See Appendix D: Statement of Limited Warranty, New Instruments, for more information.

1.4 Unpacking and Inspection

Before unpacking the instrument, locate the packing invoice on the outside of the carton. The

invoice lists every item that was included in your shipment. Each LumaSense E

2

T QUASAR

M8100-EXP instrument is configured to customer specifications. It is recommended that you
confirm that the instrument’s configuration meets expectation by carefully reviewing the

packing slip details.

Advertising
This manual is related to the following products: