GW Instek GDS-2000A series Option User Manual - Manual (Page 41)

LOGIC ANALYZER
41
Set Vertical
Position 5. Press Vertical until div parameter is
highlighted. Use the Variable knob
to set the position.
Set Vertical Scale 6. Press Vertical until X scale
parameter is highlighted. Use the
Variable knob to set the scale.
Edit Labels 7. Press Edit Labels to edit the label
for the currently selected analog
waveform. See page 41 for details.
Note
Only one analog waveform can be displayed at a time.
Adding Labels to Digital Channels
Background Digital labels can be added to each digital channel
or to one of the analog waveforms.
Panel Operation 1. To edit labels for the digital
channels, press the Edit Labels soft-
key from the D15~D0 On/Off
menu.
To edit labels for the analog
waveforms, press the Edit Labels
soft-key from the Analog Waveform
menu.
2. Press Label For and select a channel
or waveform.
Label For D0~D15
A1, A2