GW Instek GDS-2000A series Option User Manual - Manual (Page 76)

GDS-2000A Series Options Manual
76
2. Press Mode from the bottom menu
to change the triggering mode.
3. Use the side panel to select Auto or
Normal triggering modes.
Range Auto, Normal
Logic Trigger
Background The digital channels can be set up to trigger on
specified logic levels and for a specified clock edge.
For example the digital channels can be set to
trigger on the rising edge of the clock signal when
bit 1 (D1) is high and all other channels are
ignored.
Panel Operation 1. Press the Trigger Menu key.
Menu
2. Press Type from the bottom menu.
3. Select Others → Logic from
the side menu. The Logic
indicator appears at the
bottom of the display.
From left: Bits D15~D0
4. Press Define inputs from the
bottom menu.