GW Instek GDS-2000A series Option User Manual - Manual (Page 73)

LOGIC ANALYZER
73
Variable knob to highlight a binary
or hex digit and press Select. Use
the Variable knob to choose a value
for the digit and press Select to
confirm.
VARIABLE
Binary 0,1, X (don’t care)
Hex 0~F, X (don’t care)
Direction 14. Press Direction on the bottom menu
and choose the direction from the
side menu.
Direction Write, Read, Read or Write
SPI Bus Trigger Settings
The SPI bus trigger conditions can be set at any time after the bus
setting has been set to SPI.
Panel Operation 1. Set the Bus to SPI in the bus menu. Page 57
2. Press the Trigger Menu key.
Menu
3. Press Type from the bottom menu.
4. Press Others from the side
menu and select Bus.
5. Press Trigger On and select the
triggering condition for the SPI
bus.
SPI SS Active, MOSI, MISO,
MOSI&MISO