GW Instek GDS-2000A series Option User Manual - Manual (Page 67)

LOGIC ANALYZER
67
Press Cancel to cancel the editing
and return to the Edit Label
menu.
6. The label will appear next to the bus indicator.
Below, the label “BUS_1” was created for the
bus.
The bus is labeled
as BUS_1
Remove Label Press Label Display to toggle the label
on or off.
Using Cursors with the Serial Bus
Background The cursors can be used to read bus values at any
position.
Note
Ensure that one of the serial buses has been
selected and is activated.
Panel Operation 1. Press the Cursor key. Horizontal
cursors appear on the display.
Cursor
2. Press the H Cursor soft-key and
select which cursor(s) you wish to
position.
Range Description
Left cursor ( ) movable, right
cursor position fixed
Right cursor ( ) movable, left
cursor position fixed