GW Instek GDS-2000A series Option User Manual - Manual (Page 59)

LOGIC ANALYZER
59
Configuration The Configure menu sets the data line logic level,
SCLK edge polarity, word size and bit order.
1. Press Configure from the bottom
menu.
2. From the side menu select SCLK edge, SS logic
level, word Size and Bit order.
SCLK
rising edge , falling edge
SS Active High, Active Low
Word Size 4 ~ 32 bits
Bit Order MS First, LS First
Bus Encoding
Background The bus that is displayed on the screen or in the
event tables can be set to either hex or binary
formats.
Operation Press Bus Display from the Bus
menu and choose either Hex or
Binary from the side menu.
Threshold Configuration
Background The threshold levels for the Serial buses can be set
to either a user-defined threshold level or to pre-
set threshold.
Set the Threshold 1. Press Threshold from the bottom
menu.