GW Instek GDS-2000A series Option User Manual - Manual (Page 44)

GDS-2000A Series Options Manual
44
Bus Key Configuration
The Bus key is used to configure the Parallel and Serial bus inputs.
The Bus menu also features an event tables to track and save your
bus data.
Bus Display
Bus indicator
Digital channel indicators
Trigger
configuration
Data Start bit Stop bit
Start Bit The Start bit is shown as a open bracket (Serial bus
data only).
Stop Bit The Stop bit is shown as an closed bracket (Serial
bus data only).
Data Data packets can be shown in Hex or Binary. The
color of the packet is the same as the channel color.
Error Indicator If there is an error in decoding the serial data, an
error indicator will be shown.
Bus Indicator The Bus indicator shows the bus position. The
active bus is shown with a solid color. The Variable
knob can be used to horizontally position the Bus
indicator when it is active.
Active bus
(solid indicator)
Activated bus
(transparent indicator)