GW Instek GDS-2000A series Option User Manual - Manual (Page 46)

GDS-2000A Series Options Manual
46
Parallel Bus
Input Configuration
Background The digital channels can be configured as a parallel
bus. The number of bits that define the bus as well
as which bit is used as the bus clock can also be
configured.
Note
The trigger should also be set to parallel bus.
Please see page 74 for details.
Panel Operation 1. Press the Bus key.
B
BUS
2. Press the Bus soft-key and select
Parallel from the side menu.
3. Press Define Inputs from the bottom
menu.
4. Press Number of Bits from the side
menu and select the number of bits
for the data bus.
By default the bus is assigned bits
D0, D1, D2 and so on up to the last
bit.
5. You may also assign a bit as a
clock. This bit will be one of the
bits in the bus. To add a clock bit,
press Clock Edge and select type of
clock edge. Selecting Off will
disable the clock bit.