GW Instek GDS-2000 series Programming manual - Manual (Page 33)

GDS-2000 Series Programming Manual
33
:CHANnel<X>:DISPlay
Enable or disable the channel’s display.
Syntax
:CHANnel<X>:DISPlay {0|1}
:CHANnel<X>:DISPlay?
Arguments
<X>→Specify the channel number (1|2|3|4)
0→Disable channel <X> display 1→Enable channel <X> display
Returns
<NR1>
:CHANnel<X>:INVert
Enable or disable the waveform invert function.
Syntax
:CHANnel<X>:INVert {0|1}
:CHANnel<X>:INVert?
Arguments
<X>→Specify the channel number (1|2|3|4)
0→Disable invert function 1→Enable invert function
Returns
<NR1>