GW Instek GDS-2000 series Programming manual - Manual (Page 59)

GDS-2000 Series Programming Manual
59
:MEASure:ROVShoot? (query only)
Return the ratio of waveform amplitude that expressed the difference between the
high level and the positive peak level of the measured signal as it transitions from
its low state to its high state.
Syntax
:MEASure:ROVShoot?
Returns
<NR2> with a symbol of percentage “%”.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”
:MEASure:RPReshoot? (query only)
Return the ratio of waveform amplitude that expressed the difference between the
low level and the negative peak level of the measured signal as it transitions from
its low state to its high state.
Syntax
:MEASure:RPReshoot?
Returns
<NR2> with a symbol of percentage “%”.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”