GW Instek GDS-2000 series Programming manual User Manual

Page 76

Advertising
background image

GDS-2000 Series Programming Manual

76

:TEMPlate:TOLerance

Sets and query the tolerance of auto template.

Before running this command, the oscilloscope has to be initialized as “Auto

Template” mode, please add the command of “:TEMPlate:MODe 1” in order to
change the settings.

Syntax

:TEMPlate:TOLerance <NR2>

:TEMPlate:TOLerance?

Arguments

<NR2> is the desired tolerance percentage. The range is from 0.4~40 (or 0.4% to

40%).

Returns

<NR2> %

Note: Before input any template editing commands, the oscilloscope has to be initialized,

please add the command of “:GONogo:FUNCtion 1” in order to initial the oscilloscope.

Advertising
See also other documents in the category GW Instek Equipment: