GW Instek GDS-2000 series Programming manual - Manual (Page 67)

GDS-2000 Series Programming Manual
67
:REF<X>:LOCate
Adjust the position of reference waveform Ref A ~ D.
Syntax
:REF<X>:LOCate <NR1>
:REF<X>:LOCate?
Arguments
<X>→ Specify the location of reference waveform (1|2|3|4)
1→ Ref A 2→ Ref B
3→ Ref C 4→ Ref D
<NR1> between 100 ~ -100
Returns
<NR1>
:REF<X>:SAVe
Save input waveform as reference waveform Ref A ~D
Syntax
:REF<X>:SAVe {1|2|3|4|5}
Arguments
<X>→ Specify the location of reference waveform (1|2|3|4)
1→ Ref A 2→ Ref B
3→ Ref C 4→ Ref D
SAVe {1|2|3|4|5}→ Specify the input waveform source
1|2|3|4→ channel 1~4. 5→ Math
Example
:REF1:SAVe 2 Save channel two’s waveform as reference waveform A.