GW Instek GDS-2000 series Programming manual - Manual (Page 53)

GDS-2000 Series Programming Manual
53
:MEASure:FPReshoot? (query only)
Return the ratio of waveform amplitude that expressed the difference between the
high level and the maximum level of the measured signal as it transitions from its
high state to its low state.
Syntax
:MEASure:FPReshoot?
Returns
<NR2> with a symbol of percentage “%”.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”
:MEASure:FREQuency? (query only)
Return the value of Frequency measurement.
Syntax
:MEASure:FREQuency?
Returns
<NR3>.
Note: Please select the specific channel before implement any measurement. See
explanation for “:MEASure:SOURce”