GW Instek GDS-2000 series Programming manual User Manual

Page 47

Advertising
background image

GDS-2000 Series Programming Manual

47

:GONogo:VIOLation

Sets and query the user-defined GO/NO-GO violation conditions. This command is

equal to the function key “F3” pressing of GO/NO-GO menu.

Syntax

:GONogo:VIOLation {0|1|2|3}

:GONogo:VIOLation?

Arguments

0→Stop

1→Stop + beep

2→Continue

3→Continue + beep

Returns

<NR1>

Note: Before running any Go/NoGo commands, the oscilloscope has to be initialized, please

add the command of “:GONogo:FUNCtion 1” in order to initial the oscilloscope.

Advertising
See also other documents in the category GW Instek Equipment: