KANOMAX 2211 Handheld IAQ Monitor - Manual (Page 21)

16
Display Procedure
Press
press
and Select [3.OA%] .
<To Set Sampling Time >
Use
to Select [1.MODE]
Ｐ ress .
Use
to Select [TEMP.] or [CO2]
Ｐ ress .
<SAMPLING TIME>
Press
and select [2.SAMPLING TIME]
Press .
Use to set an appropriate number (1-999),
Press .
<NO.TRIAL>
Press
and select [3.No.TRIAL],
Press .
Press to select No. TRIAL (1-999),
Press .
%OA MODE (Ventilation Ratio Measurement) Display Icons
1. Calculation MODE
TMP. ： To calculate by taking in temperature
value.
CO2： To calculate by taking in CO
2
concentration.
2. SAMPLING TIME （1-999 sec.）
To Set the length of sampling time of measurement.
3. No. TRIAL(N) （1-999times）
To set the number of trials(data) needed of desired
Sampling time.
4. DATA STORAGE （YES/NO）
5. SET TO START
Save the setting and return to standby.
Remaining Memory
Total Memory