KANOMAX 2211 Handheld IAQ Monitor User Manual
Page 22
17
Display
Procedure
<DATA STORAGE>
Press
to select [4.DATA STORAGE],
Press
.
Use
and select [YES] or [NO],
Press
.
<SET TO START>
Use
and select [5.SET TO START],
Press
.
※
If you press
before saving the settings it will return you
back to Main Menu.
<Ready>
Press
to start.
<While Measuring>
Press
to stop.
Press
again to resume.
※
Press
can also stop the measurement but this would not
store any data.
<Ready for the Next Measurement Point>
After completing R_A mode measurement, [NEXT] appears to
indicate the standby status for the S_A mode measurement.
Then, S_A mode and O_A mode follows respectively.
①
②
③
④
⑤
①
②
③
④
⑤
Display Icons:
①
RDY.: Current Status (READY/SAMPLE)
②
N 1: Number of data measured including current
③
/ 50: Total number of data to be measured
④
TMP.: Calculation Mode (TEMP. = temperature)
（
[CO2] appears for CO
2
Mode）
⑤
R_A: Measuring point
（
R_A: Respiratory Air, S_A: Supplied Air, O_A: Open
Air）
①
②
③
④
⑤