KANOMAX 2211 Handheld IAQ Monitor - Manual (Page 30)

25
<Set Print Out Range>
You can select the range of calculation.
（ If you are not going to change the data range, press to calculate
the entire data.）
Press .
Cursor will appear on “START”
Use to select starting point.
Press .
Cursor will move to “END”
Use to select l.
Press .
Press to calculate.
You CANNOT set more than one range.
Press to select the content of the Print Out.
Use to select.
Press to print out.
１． RESULT……Condition and Calculation Result
２． DATA………Condition and Stored Data
３． ALL…………Condition, Calculation Result and Stored Data