KROHNE Summit 8800 Vol 3 - Manual (Page 135)

135 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol3 R02 en
SUMMIT 8800 COMMUNICATION 08
8 .4 .2 Modbus slave addresses
Registers which can be read by the master can be filled with information. The Summit can be
user configured and has very flexible capabilities to ensure that any type of variation is covered.
Figure 183 Modbus slave register configuration
From the ID tree, select the registers to be used and drag them into the Modbus list on the right
hand side of the window.
Figure 184 Modbus slave ID lists: variables, log data, status bits
The ID’s can be chosen from three ID trees:
Variables Contains all normal variables
Log data Contains all data logs configured and its variables
Status Bits Contains all alarms and status bits which can be read as individual bits
The three trees can be selected below the ID list