KROHNE Summit 8800 Vol 3 - Manual (Page 54)

54 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol3 R02 en
SUMMIT 8800 DISPLAY & WEB ACCESS 06
Figure 53 Mimic display definition
6 .7 .1 Mimic diagram selection
The top part of the display defines the mimic page as a whole:
Figure 54 Create a mimic display canvas
With as functions:
Select an existing mimic Press “select mimic” to select a mimic from the list of existing mimics
Create a new mimic Press “new” to create a new mimic from a blank or template, see below
Rename an existing mimic Press “rename” to change the name of the mimic
Delete a mimic Press “delete” to remove the mimic. Note that there is no warning.
Add to display menu If checked, this mimic will be placed in the menu item “supervisory”
If not checked, the mimic can be used as a display page. See chapter 7.3.3
A new mimic can be created from:
A blank canvas An empty canvas will be generated
A template A predefined system template mimic will be used as a start of the mimic
Of course a name must be given to the new mimic.