KROHNE OPTIFLEX 2200 C_F EN - Manual (Page 74)

6
OPERATION
74
OPTIFLEX 2200 C/F
www.krohne.com 07/2013 - 4000668002 - HB OPTIFLEX 2200 R02 en
6.3.5 Function description
1.0.0 Information (Info.) menu
Menu
No. Function Function description Selection list Default
1.1.0 IDENT.
1.1.1 SERIAL NUM. The device serial number. Read only.
1.1.2 CONV.FIRM.VER The converter firmware version. Read only.
1.1.3 SEN.FIRM.VER The sensor firmware version. Read only.
1.1.4 HMI.FIRM.VER The HMI (device display screen) firmware
version.
Read only.
1.2.0 OUTPUT I
1.2.1 SUMMARY I This shows the settings at this time for the
output function (OUTPUT FUNC.), output
range (RANGE I), 4 mA setting (SCALE
4mA), 20 mA setting (SCALE 20mA), and
error delay (ERROR DELAY).
Read only.
1.3.0 HISTORY
1.3.1 ERROR RECORD A log of device errors. Push [>>>>] to read the
errors. Push [    ] or [    ] to scroll up or
down the list. Each error is identified by a
code. Push [>>>>] again to show the number of
incidents and the time since the last
incident in days, hours, minutes and
seconds. For more data about errors, refer
to Status and error messages on page 90.
Read only.