Martel Electronics DPC300A - Manual (Page 3)

1
1. Introduction
The DPC-300A is a high accuracy portable pressure source that can
accurately source pressure from internal and external pressure
supplies. The product includes two pneumatic pressure sources.
One source is an automated internal, -12 to 300 psi (-0.8 to 20 bar)
pump and the other is connection to allow the regulation of
externally supplied clean dry air (shop air up to 120psi). In addition
to pressure generation and measurement, the unit has full electrical
measurement capabilities from 0 to 24mA and 0 to 30VDC. It also is
able to generate 4 to 20mA signals and a full-time 24 volt loop power
supply is always available utilizing dedicated jacks on the front
panel. Additional pressure ranges can also be supported through
the use of external pressure modules. The unit can be powered by
an internal, high capacity, rechargeable battery or the included AC
adapter/charger.
1.1 Customer Service
Corporate Office:
www.martelcorp.com
e-mail: [email protected]
Tel: (603) 434-1433 800-821-0023 Fax: (603) 434-1653
Martel Electronics
3 Corporate Park Dr.
Derry, NH 03038
1.2 Standard Equipment
Check to see if your calibrator is complete. It should include: DPC-
300A, instruction manual, test leads, calibration hose kit with fittings,
16V Universal AC charger, Nist traceable calibration certificate.