Martel Electronics DPC300A - Manual (Page 43)

41
8. Warranty
Martel Electronics Corporation warrants all products against material
defects and workmanship for a period of twelve (12) months after the
date of shipment. Problems or defects that arise from misuse or
abuse of the instrument are not covered. If any product is to be
returned, a “Return Material Author ization” form can be obtained
from our website www.martelcorp.com under customer service. You
can also call 1-800-821-0023 to have a form faxed. Martel will not be
responsible for damage as a result of poor return packaging. Out of
warranty repairs and recalibration will be subject to specific charges.
Under no circumstances will Martel Electronics be liable for any
device or circumstance beyond the value of the product.
9. Maintenance
9.1 Cleaning the Unit
Warning
To avoid personal injury or damage to the calibrator, use only the
specified replacement parts and do not allow water into the case.
Caution
To avoid damaging the plastic, do not use solvents or abrasive
cleansers.
Clean the calibratwith a soft cloth dampened with water or water and
mild soap.
9.2 Service Center Calibration or Repair
Only qualified service personnel should perform calibration, repairs,
or servicing not covered in this manual. If the calibrator fails, check
the batteries first, and replace them if needed.
Verify that the calibrator is being operated as explained in this
manual. If the calibrator is faulty, call for an RMA number or go to
www.martelcorp.com to download an RMA form to return the unit. Be
sure to pack the calibrator securely, using the original shipping
container if it is available.