NSi Industries K801Z User Manual
Page 7
REMOTE OVERRIDE
26.
Do You Want to Set or Review Remote Override Time?
PRESS YES if required. If not, PRESS NO and proceed to Step #28.
Enter Load Number —
PRESS ENTER
Load 1 Remote Override time MIN 000 IS THIS OK?
PRESS NO for unit to delete 000.
Unit asks — ENTER Remote Override Time.
ENTER amount required up to 255 minutes. (4 hours, 15 minutes)
Unit will review entry and ask if OK?
PRESS YES if correct. If not, PRESS NO and enter a different time.
27.
Unit will again ask Do You Want to Set or Review Remote Override Time?
PRESS YES for any additional override times or PRESS NO to proceed.
NOTE:
A signal timer channel will turn ON only for the programmed signal duration when the remote input is activated.
ASTRONOMIC SETTINGS
NOTE: To set channel for Astronomic from the RUN MODE, PRESS REVERSE. PRESS YES to enter options,
PRESS NO until units asks for Astro. Now PRESS YES, then proceed as below:
28.
Do You Want to Set or Review Astro?
PRESS YES if you want to set a channel or channels to ASTRO MODE.
If not,
PRESS NO, and you will be transferred to the next option (pulse switching).
29.
Latitude 10 Deg North. Is this OK?
PRESS YES if this latitude is desired or PRESS NO if you wish to choose a different latitude.
If
NO is pressed, display shows:
Is North Latitude OK?
Answer
YES or NO. If NO is chosen, display shows:
30.
Is South Latitude OK?
After one of the above questions is answered
YES, display shows:
ENTER LATITUDE DEG
Enter latitude between 10 and 60 degrees, then
PRESS ENTER. Check with your local weather bureau
for the correct latitude in your area.
Unit will now display latitude and degrees chosen and asks, IS THIS OK? If correct,
PRESS YES. If NO
is pressed for South Latitude, unit will ask if North Latitude is OK.
31.
Enter Load Numbers
Enter the load number for which ASTRO MODE is desired, then
PRESS ENTER.
32.
WHICH DAYS?
Select days for which Astro operation is desired, then
PRESS ENTER.
33.
Seasonal Schedule?
If you want your normal Astro schedule during any Season,
PRESS YES.
34.
Display Asks: Which Seasons?
Select any Season during which you want astronomic schedule to occur, then
PRESS ENTER. You must
enter
ALL Seasons if you wish year round ASTRO operation.
NOTE: Sunrise OFF will automatically be entered for every day, holiday, and season.
35.
Sunrise AM ##:##
Enter Offset Min
Enter how many minutes (1-99) before or after sunrise you want Astro-Off to occur, then
PRESS ENTER,
or enter two zeros if no offset is desired.
36.
After Sunrise?
PRESS YES if you want lights to go OFF after sunrise. Otherwise PRESS NO. If NO is pressed, display
asks: BEFORE SUNRISE?
6