SHIMPO CEG-2000 - Manual (Page 22)

-19-
6.4.3 Clearing the master match
1) In Measuring Mode, hold down the right arrow
(MAS) key for at least two seconds.
2) The “MAS” LED (orange) will light up, “MIN M.”
will be displayed, and the unit will switch to Master
Matching Mode.
3) Press the right arrow key once.
4) This will switch to Detector Adjustment, and
“ADJ” will be displayed.
5) Press the right arrow key once.
6) This will switch to Clear Master Match, and
“MAST CLS” will be displayed.
7) Pressing the ENT key will clear all master matching
data, “M.CLS OK” will be displayed and the unit
will return to 6.4.1 “Master Matching.”
RST
ENT
MAS SET
1 2 3
SET MAS
1)
RST
ENT
MAS SET
1 2 3
SET MAS
2)
3)
RST
ENT
MAS SET
1 2 3
SET MAS
4)
5)
RST
ENT
MAS SET
1 2 3
SET MAS
6)
7)