SHIMPO CEG-2000 - Manual (Page 4)

-1-
1 Overview
Our columnar electronic micrometer features color bars of three different colors, which makes
the display easy to see. The meter also features an automatic master matching function.
It can be used by itself or can easily be deployed in complex combinations with other
components. With the bar displays arrayed next to each other, the property of the object being
measured can be ascertained.
2 Features
(1) Displays measurement results clearly using a three-color color bar display.
(2) With an eight-digit display, it can display such information as measured values and setting
names.
(3) Master alignment for both large and small limits can be accomplished at the push of a
button.
(4) Because the instrument is only 50mm wide, it can be used in a series configuration.
(5) With the serial communications function (included standard), data can be output to a PC and
printer. The data can be saved and input into statistical and spreadsheet applications (such as
Microsoft Excel).
(6) In the Set-up Mode, all settings can be entered in order by pressing the ENT key.
(7) Up to 10 different sets of settings and master values can be saved and selected from.
3 Operation
This instrument has the following four principal modes of operation:
(1) Measurement mode
• Measurement mode Measures
• Hold measurement Saves the measured values
However, if master matching was unsuccessful, the values are
not saved.
(2) Set-up Mode
• Set-up Mode Inputs or changes settings.
(3) Master matching mode
• Master matching Matches with a master.
This instrument conducts comparative measurements, so only
use it after having measured a master for comparison.
• Adjust detector (ADJ) This will adjust the detector.
• Clear master match This will clear master match data.
(4) Program switching mode
• Program switching mode Switches programs.
The instrument launches with the last program that was used
before it was last shut down.