West Control Solutions KS 42-1 - Manual (Page 29)

+ BlueControl - the engineering tool for the BluePort
â
controller series
3 engineering tools with different functionality facilitating KS4x-1 configuration
and parameter setting are available (see chapter 10: Accessory equipment with
ordering information).
In addition to configuration and parameter setting, the engineering tools are used
for data acquisition and offer long-term storage and print functions. The enginee-
ring tools are connected to KS4x-1 via the front-panel interface "BluePort
â
" by
means of PC (Windows 95 / 98 / NT) and a PC adaptor.
Description BlueControl: see chapter 9: BlueControl (page 49)
4.3 Set-point processing
The set-point processing structure is shown in the following picture:
Configuration level
Operating KS4x-1 29 Set-point processing
Name Value range Description Default
IPar Block parameter level (only visible with BlueControl!) 1
0 Released
1 Blocked
ICnf Block configuration level (only visible with BlueControl!) 1
0 Released
1 Block
ICal Block calibration level (only visible with BlueControl!) 1
0 Released
1 Blocked
2
3
1
4
5
6
7
0
Ü
Xeff
SP.2
SP.E
0/4...20 mA
internal setpoint
*
Ö
125
126
SP.x run
Err
A Ada da
SP.Hi
SP.Lo
r.SP
- LED
external
setpoint
INP2
limitation
ramp
2.setpoint
The ramp starts at process value
with the following switchings:
- int / ext-setpoint switching
-
/ switching
- Manual-/ Automatic switching
- at power on
SP SP.2
actual
setpoint
Index:
Ь
*
Ц : int/ext-setpoint switching
: configuration
:
/ switching
SP.Fn
SP SP.2
{
ù
programmer
timer