West Control Solutions MRC 5000 Recorder Manual - Manual (Page 31)

31
Warranty and Return Statement
These products are sold by Danaher Controls under the warranties set forth in the following paragraphs. Such warranties are
extended only with respect to a purchase of these products, as new merchandise, directly from Danaher Controls or from a
Partlow Brand distributor, representative or reseller, and are extended only to the first buyer thereof who purchases them other
than for the purpose of resale.
Warranty
These products are warranted to be free from functional defects in materials and workmanship at the time the products leave
the Danaher Controls factory and to conform at that time to the specifications set forth in the relevant Partlow Brand instruc-
tion manual or manuals, sheet or sheets, for such products for a period of two years.
THERE ARE NO EXPRESSED OR IMPLIED WARRANTIES WHICH EXTEND BEYOND THE WARRANTIES HEREIN AND
ABOVE SET FORTH. DANAHER CONTROLS MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO THE PRODUCTS.
Limitations
Danaher Controls shall not be liable for any incidental damages, consequential damages, special damages, or any other
damages, costs or expenses excepting only the cost or expense of repair or replacement as described above.
Products must be installed and maintained in accordance with Danaher Controls instructions. Users are responsible for the
suitability of the products to their application. There is no warranty against damage resulting from corrosion, misapplication,
improper specifications or other operating condition beyond our control. Claims against carriers for damage in transit must be
filed by the buyer.
This warranty is void if the purchaser uses non-factory approved replacement parts and supplies or if the purchaser attempts
to repair the product themselves or through a third party without Danaher Controls.
Returns
Danaher Controls sole and exclusive obligation and buyer’s sole and exclusive remedy under the above warranty is limited to
repairing or replacing, free of charge, the products which are reported to Danaher Controls at its main office indicated below.
Danaher Controls is to be advised of return requests during normal business hours and such returns are to include a state-
ment of the observed deficiency. Shipments MUST be marked with a RMA number obtained from Danaher Controls. The
buyer shall pre-pay shipping charges for products returned and Danaher Controls or its representative shall pay for the return
of the products to the buyer.