Airedale LogiCool FreeCool 40kW - Manual (Page 9)

Chillers LOGICOOL
™
Chillers
9
Technical Manual : 6521355 V1.8.0 07/2014
Electronically
Commutated (EC) Fan
Motor Sickle bladed fan assemblies with integral long bellmouth and fingerproof grille.
Incorporate external EC rotor motor technology, to provide highly accurate discreet speed
control, discharge air vertically. The fans offer maximum airflow performance while
keeping sound levels to a minimum.
Each fan incorporates on board electronics with inverter-driven DC motor control,
responding to a signal from the unit microprocessor.
For further details, please refer to Design Features & Information , on page 13.
Energy Manager Analysis of system energy consumption can be monitored via a dedicated LCD display.
Unit parameters can be adjusted via the unit microprocessor control to affect energy
usage in line with the system need.
OPTIONAL EXTRAS - GENERAL
Corrosion Resistant
Coated Coils In atmospheres where high corrosion is anticipated a corrosion resistant coating is applied
to the aluminium fins of either phenolic or epoxy, dependent upon size.
Anti Vibration Mounts
(Pad Type) Pad vibration isolators can be supplied loose for on site fitting to the base frame of each
chiller unit.
The isolators are suitable for fitting to structural steelwork providing the surface is level
and of sufficient strength where a moderate degree of vibration elimination is required.
BMS Interface Card Enables controlled chillers to be interfaced with most BMS, including
Airedale’s own pCOWeb, factory fitted, please contact Airedale.
R410A Leak Detection
System A factory calibrated and fitted leak detection system, will raise an alarm when refrigerant
gas is detected.