Badger Meter GALAXY - Manual (Page 5)

ABOUT THIS MANUAL
The GALAXY® Programmer manual provides instructions for using the GALAXY Programmer software with the Trimble®
Ranger handheld
Features of the GALAXY Programmer Software
The GALAXY Programmer software is designed for GALAXY TR3 and TR2 endpoints The endpoints can be used with all
Badger Meter encoders, including the HR-E LCD Encoder, Absolute Digital Encoder (ADE®) and Recordall® Transmitter Register
(RTR®), as well as compatible three-wire competitive encoders Refer to the GALAXY Fixed Network Water Endpoint Installation
Data manual, GXY-I-10-EN, for details
Instructions for the following functions of t he GALAXY Programmer software are described in this manual:
• Capture meter readings and radio status, including alert flags
• Start, pause and stop the endpoint radio
• Verify a repair following a tamper
• Program the endpoint (RTR only)
Handheld Requirements
The GALAXY Programmer software runs on a Trimble Ranger 3 handheld with a Windows® Mobile 6 5 Professional operating
system and on a Trimble Ranger X handheld with a Windows Mobile 5 0 operating system
Programming Manual
Page 5 February 2013