Badger Meter High Resolution LCD Encoders (HR-E LCD) - Manual (Page 15)

Installation and Programming Manual
CONNECTING THE HR-E LCD ENCODER
To read and program the encoder using the Infrared Remote (IR) head, you must connect the IR head to a serial port on
your computer:
1 Plug the serial connector of the IR head into the serial port of your computer, or plug the serial connector of the IR
head into the serial-to-USB adapter, then plug the USB adapter into a USB port
2 Open the lid on the encoder
3 Mount the IR head bracket onto the encoder, aligning the hole in the holder with the IR port on the encoder
4 Rest the IR head in the bracket with the nubs on the back of the head seated in the slots of the bracket
Parts List
The 67660-001 kit includes:
67451-001 IR head bracket
67572-009 HR-E LCD Programming Software (not shown)
These optional parts are also available:
64436-023 IR programming and data profile cable
64436-029 Serial-to-USB Adapter
Page 15 December 2012