Badger Meter High Resolution LCD Encoders (HR-E LCD) - Manual (Page 21)

Installation and Programming Manual
Rate of Flow Units Field
The Rate of Flow Units field displays the unit by which the rate of flow is measured
The factory-programmed default is Gallons
Select the drop-down menu to the right of the data field to select a different rate of flow units The options are gallons, cubic
meter, liter, cubic feet, and Imperial gallons
Rate of Flow Time Field
The Rate of Flow Time field displays the time unit set for the rate of flow
The factory-programmed default is Per Minute
Select the drop-down menu to the right of the data field to select a different rate of flow time The options are minutes, hours,
or seconds
Page 21 December 2012